:	Jan 17, 2005

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the wheel and tire.

.

Remove the brake caliper lower bolt.

.

LH side only: Disconnect the brake pad wear indicator sensor.

.

Disconnect the brake hose from the brake caliper.   Remove the union.   Remove and discard the two sealing washers.   Install blanking caps to the exposed ports.

.

Remove the brake pads.   Rotate the brake caliper upwards.   Remove the two clips.

.

Remove the brake caliper upper bolt.

.

Remove the brake caliper housing.

.

: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled. Clean the caliper housing and anchor plate using brake cleaning fluid.

.

Install the brake caliper.

.

Install the brake caliper upper bolt.   Tighten the bolt to 35 Nm (26 lb.ft).

.

Install the brake pads.   Install the two clips.

.

Rotate the brake caliper downwards.   Tighten the bolt to 35 Nm (26 lb.ft).

.

Connect the brake hose to the brake caliper.   Remove the blanking caps from the ports.   Install new sealing washers.   Tighten the brake hose union to 32 Nm (24 lb.ft).

.

Connect the brake pad wear indicator sensor.

.

Install the wheel and tire.   Tighten the wheel nuts to 140 Nm (103 lb.ft).

.

Bleed the brake system.